Crossbows Arrows Accessories Technologies Videos Crossbows 101 Wicked Ridge
About TenPoint My TenPoint Support Contact Us

20" Pro Elite Carbon Crossbow Arrows

20" Pro Elite Carbon Crossbow Arrows is rated 4.7 out of 5 by 40.
  • y_2017, m_4, d_24, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en_US, sid_25, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_tenpoint
  • bvseo_sdk, net_sdk, 3.1.2.0
  • CLOUD, getAggregateRating, 2ms
  • REVIEWS, PRODUCT
Price: $0.00
Quantity:
 
Select Purchase Option
Available www.tenpointcrossbows.com

Description 

The Pro Elite 20-inch 22/64ths diameter carbon fiber arrow is fletched slightly offset with Q21 vanes. It is fitted with a 68-grain brass insert and TenPoint’s neon yellow Superbrite Omni-Nock. Precision engineered, Pro Elite shafts are inspected for straightness to within .003 and hand-sorted for weight tolerance to within two grains per dozen.

*Standard-weight / 425-grains

*Available in 3-pack or 6-pack

*Vane colors may vary

Rated 5 out of 5 by from Wickedly accurate crossbow bolts! I first became aware of Pro Elite Carbon bolts after borrowing my younger brother's TenPoint crossbow three seasons ago. When I purchased my own TenPoint Titan Extreme crossbow, I just naturally wanted the same speed and power in my bolts as I'd experienced with my brother's crossbow. The practice groups are small, so small that I only shoot at the same spot a couple of times before using a different targeting area. No Robin Hooding for my bolts! In the field, they fly true and always deliver a punch that has consistently required less than 100 yards of tracking. More will be on order for my upcoming birthday (spring turkey is just around the corner)!
Date published: 2017-03-08
Rated 5 out of 5 by from Pro Elite Carbon True and straight arrows. Great quality. Work well with the Omni Knocks.
Date published: 2016-04-20
Rated 3 out of 5 by from Very consistent grooups I purchased a 6 pack of the Pro Elite Omni-Brite 2.0 arrows (HEA-638.6) and a 6 pack of the standard Pro Elite (HEA-620.3) arrows. Because of the cost difference my plan was to use the standard arrows for target practice and the Omni-Brite arrows for hunting. The standard arrows were great, very consistent. I decided to shoot just one of the lighted arrows to verify that they flew the same as the others. The first time I removed the nock to turn off the light the whole insert came out of the shaft. No big deal, I simply glued it back in but I had big problems with the arrow not grouping with the standard arrows. I was about to call Ten Point and return all 6 of the Omni-Brite arrows when I noticed a wear mark on the down vane. After close inspection of all the arrows it appeared that the nock was not aligned properly with the down vane of the arrow. Given all the indents on the omni-nock I assumed it didn't make any difference how the nock was installed. Believe me, it makes a big difference. At least it does on my Turbo GT. You need to make certain that two of the opposing indents on the Omni-Nock are aligned perpendicular to the down vane of the arrow. I used a tooth pick placed across opposing indents in the nock to insure it was perpendicular to the vane and the arrow now flies perfectly, grouping tightly with the standard arrows. Don't know why they have 5 indents on the nocks when only two are used if aligned properly. My other complaint about the arrows is that both the standard and the Omni-Brite came with glossy white down vanes. The two arrows in the quiver stick out like a sore thumb due to the white vanes. Waving a white Kleenex around your tree stand or blind might do a better job of attracting the attention of deer or other critters but not by much. There are few things in the woods that are pure white. A deer's rear end and my arrows are two of them. I used a permanent felt tip marker to paint them black. Whoever's idea it was to use glossy white vanes needs to spend some time in a tree stand trying to be invisible.
Date published: 2016-10-31
Rated 5 out of 5 by from Good arrows The pro elite arrows fly very true from my Stealth FX4. Small groups at 75 yards are not a problem
Date published: 2016-06-07
Rated 5 out of 5 by from Pro Elite Carbon Arrows Excellent all around arrow! So far I am still shooting the original arrows I purchased with the bow. I have shot 2 whitetail deer, with one arrow ending up buried in a tree, and it is still as true as the day I bought it. Seemingly indestructible!
Date published: 2017-03-07
Rated 5 out of 5 by from Solid Bolts Nice accurate bolts that do not shatter when they hit an animal. I have several tree hits on pass throughs and the bolts also do not break due to the shock. The first photo is a my very first deer with one of these bolts. It is a "deer fever" shot, but shows the penetration power of the crossbow and bolt. Shot at 20 yards using the 40 yard pin. Harvested at point of impact. The second photo is of a Virginia buck shot at 30 yards. Bolt flew true and deer was harvested at 75 yards.
Date published: 2017-03-11
Rated 5 out of 5 by from A bit pricey. These are a little pricey, but they are spec'd for my bow, and have omni nocs. They shoot VERY well, and hold up nicely. I don't hesitate to take them from the range to the field after changing from bullet points to broadheads. I always shop sales though, as the list price for these punishes my "fun stuff" budget!
Date published: 2017-03-08
Rated 5 out of 5 by from Excellent Value Extremely accurate, and gets the job done. I used these exclusively during the 2016 deer season, with the New Archery Spitfire Crossbow mechanical broadhead. I shot an 8 pt that ran 20 yards max before going down. I cannot overemphasize the accuracy - they'll go where you aim!
Date published: 2017-03-12
  • y_2017, m_4, d_24, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en_US, sid_25, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_tenpoint
  • bvseo_sdk, net_sdk, 3.1.2.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

I have a Titan Extreme and I use pro-elite bolts. They come with 100 Gr. points but I practice with 125 gr. points and hunt with Rage 125 gr. 2 blade mechanical. Is this too much weight increasing the tips by 25 gr. Also, Can I use these with a Turbo GT

Asked by: papadukes
Switching from 100 to 125 grain heads is just fine. You just want to make sure you are practicing with the weights you are hunting with.
Answered by: TenPoint Rep
Date published: 2017-04-04

how do you refletch a bolt

Asked by: oswald
We have a refletching tool that fits in the back of the triangle hole that is in the back of the arrow. This lets you drop the arrow into a refletching jib just like you would any normal arrow. To purchase the refletching tool, just contact us directly.
Answered by: TenPoint Rep
Date published: 2017-03-30

Can I order these arrows without the Red & White vanes, but with another color?

Asked by: Tim1
Currently they are all coming with Red and White vanes. You can check with your local dealer to see if they have some other color options.
Answered by: TenPoint Rep
Date published: 2017-03-27

Pro Elite Carbon versus XX75 Magnum Aluminum ? Which would you recommend for my Titian Xtream while whitetail hunting, using 100 gr mechanical blade ? Pro & Cons ?

Asked by: Tim1
Both arrows will work well. They are both a good hunting weight arrow. The Pro Elite will be a little more durable, as it will not bend like aluminum can.
Answered by: TenPoint Rep
Date published: 2017-03-27

On the pro elite 20" crossbow bolt the weight says 425 is that with/or with out field point/ broadhead . If my crossbow has a half moon nock will the Omani nock work ?

Asked by: John c
The weights we list are total arrow weight which does include the 100 grain tip. The Omni nock can be interchanged with most half moon nocks, but you will want to check with the manufacturer of your bow.
Answered by: TenPoint Rep
Date published: 2017-03-06

Can you get the vanes in another color the red and white really stands out in a treestand or can you just buy the Omni nocks so they an be installed in another arrow.

Asked by: Don63
We use a variety of colors, so yes, check your local dealer to see what they have in stock. You can buy the Omni nocks separately as well and install them on nearly any crossbow arrow shaft. Installation instructions are included.
Answered by: TenPoint Rep
Date published: 2017-02-27

Do you recommend using fixed blades with these arrows and if so which ones?

Asked by: WayneW
Mechanical heads will fly more like a field tip and provide easier, better down range accuracy. I would suggest the Spitfire 100 or the Slingblade 100.
Answered by: TenPoint Rep
Date published: 2017-02-22

Would you recommend shooting an 18" bolt out of a Warrior G3 or would that be too short?

Asked by: WayneW
The 18 inch arrow is too short and too light for the Warrior. You want to shoot a 20 inch arrow with an Omni nock that weighs 3070 grains or more. I would suggest an arrow that weighs at least 400 grains or more for the best accuracy and penetration.
Answered by: TenPoint Rep
Date published: 2017-02-22
  • y_2017, m_4, d_23, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_63
  • loc_en_US, sid_25, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tenpoint
  • bvseo_sdk, net_sdk, 3.1.2.0
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT

Related Products

TenPoint Tested. TenPoint Tough.

Crossbow Law

 

Learn the crossbow laws for the state of Washington.

Go