Crossbows Arrows Accessories Technologies Videos Crossbows 101 Wicked Ridge
About TenPoint My TenPoint Support Contact Us

Omni-Nock & Omni-Brite Lighted Nock System

A Revolution In Crossbow Arrow Nock Technology

One-Stop Source For Crossbow Arrows

Regardless of which arrow you shoot, you no longer need to choose between moon, capture, or flat nocks. TenPoint’s patented all-purpose Omni-Nock™ and its NEW 2014 patent-pending lighted version, the Omni-Brite™ Lighted Nock System, make these special-purpose nocks obsolete. The Omni-Nock and Omni-Brite designs each feature six micro-grooves that form three bowstring channels which eliminate the indexing problem associated with moon and capture nocks. Because the channel “holds” the bowstring in place, the Omni-Nock and Omni-Brite also prevents flat-nock “shoot-over” or “shoot-under”, a growing problem with today’s narrow crossbows with acute string angles. In addition, our five-arrow Easton® lineup of lightweight, standard-weight, and heavyweight crossbow arrows offer you the perfect arrow for whichever shooting or hunting situation you face. Each arrow is comes pre-installed with its own colored Omni-Nocks to make it easy to find the right nocks for your arrows.

SHOP NOW for our Omni-Nocks

SHOP NOW for our Omni-Brite Lighted Nock System

Omni-Brite Lighted Nock System

The NEW three-piece, patent pending Omni-Brite Lighted Nock System (pictured), begins with a Nock-Receiver insert with a six-sided interior cavity designed to accept a combined LED Unit and transparent pegged Omni-Brite Nock. The Nock Receiver glues into the nock-end of the arrow and must be indexed or aligned with the vanes. Like the Omni-Nocks, Nock Receivers employ the same color scheme and are, therefore, arrow-specific.

To complete the Omni-Brite installation, insert the LED Unit – lighted end first – into the peg end of the Omni-Brite Nock. Then, hand-press
the nock and LED Unit into the Nock Receiver, leaving a less-than-dime-thickness gap between the nock and receiver. When you fire your crossbow, the bowstring’s force will compress the two pieces, eliminate the gap, and activate the LED. 

To deactivate the Omni-Brite System, remove the remove the nock and LED Unit, and pull the lighted end of the LED Unit until the light turns off. The LED Unit’s battery should last for approximately eight hours.

SHOP NOW for our Omni-Nocks

SHOP NOW for our Omni-Brite Lighted Nock System

Lighted Moon and Capture Nock Options

All TenPoint Omni-Brite packaged arrows, in 3-packs and 6-packs, include optional transparent, pegged moon and capture nocks, compatible with the Omni-Nock Receiver. Therefore, if your bow manufacturer requires, you can substitute moon or capture nocks in place of the Omni-Brites.

Omni-Nock and Omni-Brite System Arrow-Building Components

For those who prefer to build their own arrows, all Omni-Nock and Omni-Brite Lighted Nock System Components are available in both three and six-pack accessory packages. The Omni-Brite Lighted System Components include Omni-Nocks, LED Units, Receivers (for arrows with shaft sizes .297, .300, and .306 I.D.), Refletching Tools, and a Nock and Receiver Alignment Tool. Also included are optional moon and capture nocks.

The Refletching Tool fits into the Omni-Nock or Omni-Brite nock, making it compatible for use on a Bitzenburger Jig.

The dual-purpose Nock and Receiver Alignment Tool has one side that mates with an Omni-Nock and is used to align it with the arrow’s vanes when gluing it in place. The other side mates with an Omni-Brite Receiver and is used for the same purpose.

 

Crossbow Law

 

Learn the crossbow laws for the state of Washington.

Go